Home » Gear » Night Vision – Prepare for the Darkness

Night Vision – Prepare for the Darkness

night vision prepare for the darkness   Night vision is an advantage multiplier. When the SHTF, some people will become predators. Any advantage you can add to your bag of tricks will be essential. Many of these people, who are preying on others, will be doing so because they haven’t prepared. You can use this lack of preparation against them, because the chances are good that they won’t have thought to purchase night vision!

Night Vision

We’d all prefer to be using Gen-3 military grade night vision, but that $3000 is a pretty hefty price tag. Many of us can’t even afford the $1500-2000 for Gen-2 night vision. Luckily there is some very good consumer grade, Gen-1 night vision on the market.

One of these really good, consumer grade, Gen 1 products is the Yukon NV 1×24 Goggles. They sit in that sweet spot, balancing cost and technology.

Yukon NV 1×24

The Yukon NV 1×24 goggles come with headgear, allowing you to operate hands-free, in the darkness.

These goggles are single power (1X), which means that they don’t magnify your view. Single power ensures that you won’t lose your depth perception. It won’t’ take much practice, before you’ll be able to navigate in total darkness, as easily as you do during the day.

The Yukon NV 1×24 Goggles will allow you to see people moving up on your position, into your perimeter or allow you to move stealthily when and where you need to.

Included Accessories

  • Head gear
  • Protective carrying case
  • Neck strap

Night Vision Yukon Tracker Goggle 1X24 BinocularSpecifications

  • 1X magnification
  • 24-millimeter lens diameter
  • 30-degree field of view
  • 32-36 lp/mm resolution
  • One yard to infinity focus range
  • 12-millimeter eye relief
  • +/-4 diopter adjustment
  • Up to 160-yard detection distance
  • 100-yard infrared illuminator distance
  • Runs on a 3V (CR123A) battery for up to 30 hours
  • -22-to-104-degree operating temperature
  • Measures 3.4 by 2.4 by 5.6 inches (W x H x D)
  • 13.4-ounce weight

Gen-1 night vision technology, while not cutting edge technology, is still valuable. It should enable you to see about 60 yards, in poor ambient light, without using the Pulsed IR illuminator. When the illuminator is activated, it will light up your surroundings almost like it’s broad daylight (ok, green-scale daylight, but you know what I mean).

All IR illuminators throw off some minor visible red light. This light is barely visible to the naked eye and if you are looking directly at the illuminator, you may see a slight red glow. If someone is using another set of Night Vision goggles, this light will be as bright as a spotlight. Make sure to keep this in mind, and test before you end up in a SHTF situation.

Every version of night vision, get’s a bit cheaper as new advances in technology come on the market. You need to keep checking the prices to find that sweet spot, that will give you the features you need at the price you want. I think for now, the best bang for your buck, in night vision, is the Gen-1 Tech, but your budget may tell you otherwise.

Ensure long-term power for your night vision devices

RCR123aMost night vision devices do not take AA or AAA batteries (but this Night Vision Rifle Scope does). They tend to use the CR123A (123A) batteries. CR123A are usually used in photography gear and tactical flashlights.

If you want to use night vision, you may need to plan ahead and get some rechargeable CR123A batteries with a AC/DC charger for them.  This will give you the ability to keep a fresh supply of batteries for your night vision and tactical flashlights, and to recharge them from AC outlets, DC outlets and our solar panels.

 

Whether you are guarding your property in a bug-in situation, or leading your family away from the  evildoers ransacking your neighborhood, the ability to leverage night vision to see and move through the night is essential, it could be the advantage that keeps you and your family fed and alive!

 

 

One comment

  1. Do you know if this will fit a standard MICH helmet NVG mount?

Leave a Reply

Your email address will not be published. Required fields are marked *

*